Attention: only compatible with straight teeth bells.
Innovative Crimaz conical crankshaft sprocket system, so we do not have to install the key.
Ideal for elaborate engines, and is even the perfect solution when the crankshaft keyway is in poor condition.
We recommend tightening the nut with a dynamometer to the torque indicated by the manufacturer of 70NM (7kg). For more safety apply thread locker to the nut.
Assembly: assemble the cone on the crankshaft, overlap the pinion, apply thread locker to the thread and assemble the washer and nut, block the pinion with the bell with a tool to tighten it to 70NM (7Kg). If we do not have the tool with a coin of 5 cents will be enough.
Disassembly: we position the extractor on the pinion, we screw the three screws, once assembled we tighten the central screw that presses on the crankshaft until it is unlocked.
Staight teeth pinion gears
- Bell 72, z22, z23, z24, z25
- Bell 69, z25, z26, z27
SKU: | CRIMAZ22 |
Homologation: | No |
Material: | No |
Make | Model |
---|---|
Make | Model |
Vespa clásica | 125 PK XL |
Vespa clásica | 125 Primavera |
Vespa clásica | 125 Super |
Vespa clásica | 75 PK XL |
Vespa clásica | 75 Primavera |
We request your permission to gather statistics regarding your use of this page, in compliance with the Royal Decree 12/2012. If you continue using this page you agree to the use of cookies. +Info